本文已被：浏览 1196次 下载 566次
投稿时间：2009-06-30
投稿时间：2009-06-30
中文摘要: 介绍了国产引进型600 MW机组给水泵及其小汽轮机密封特点,重点分析汽泵组在正常运行中或者启停时容易进水的现象.通过对该给水泵轴端密封工作原理及运行情况的分析研究表明,机组在正常运行时,汽泵轴端检漏口和呼吸器倒吸的空气进入密封水回水,导致密封水排水不畅是造成润滑油中进水的主要原因.通过运行方式改进、设备改造,以及加强化学监督等措施,基本上消除了给水泵小汽轮机润滑油中的进水问题.
Abstract:The features of the water-feeding pumps and the seal of small steam turbine of the home-made 600 MW units of the imported type are introduced, with focus on the phenomenon of water coming into the steam turbine units either in the normal operation or at starting or stopping. The analytical study of the working mechanism and the real operation of the pump shaft sea shows that during the normal operation of the units, the real cause for oil in water is the sealed air and the backwater at the shaft end steam leaking and the mouth breathing apparatus. Improved operation mode and strengthened chemical supervision, among other measures, eliminates the problem of water in the lubricating oil in the water-feeding system of steam turbines.
文章编号：20090409 中图分类号： 文献标志码：
基金项目:
| 作者 | 单位 |
| 陈跃明 | 嘉兴发电有限公司, 浙江 嘉兴 314201 |
| Author Name | Affiliation |
| CHEN Yue-ming | Jiaxing Power Company Ltd., Jiaxing 314201, China |
引用文本：
陈跃明.600MW机组给水泵小汽轮机润滑油进水原因分析及处理[J].上海电力大学学报,2009,25(4):342-345.
CHEN Yue-ming.Cause Analysis and Treatment of Water in Lubricating Oil System of Water-feed Pump Turbine of 600 MW Units[J].Journal of Shanghai University of Electric Power,2009,25(4):342-345.
陈跃明.600MW机组给水泵小汽轮机润滑油进水原因分析及处理[J].上海电力大学学报,2009,25(4):342-345.
CHEN Yue-ming.Cause Analysis and Treatment of Water in Lubricating Oil System of Water-feed Pump Turbine of 600 MW Units[J].Journal of Shanghai University of Electric Power,2009,25(4):342-345.