本文已被：浏览 1067次 下载 920次
投稿时间：2012-07-09
投稿时间：2012-07-09
中文摘要: 利用参数化设计的特点以及面向对象编程语言VB, 对CATIA进行了二次开发, 建立了轴承的参数化三维标准件库.以典型轴承为例, 分析了轴承的设计方法, 建立了具有可视化界面的轴承参数化设计系统.
Abstract:By using characteristics of parameterized design, the object-oriented programming language VB is adopted for secondary development of CATIA, and bearing parameterized threedimensional(3D)standard part library is established.Typical bearing is taken as an example,
bearing parameterized 3D standard part library system with visual interface is established.
文章编号：20130214 中图分类号： 文献标志码：
基金项目:973计划项目(2011CB706502);2012年实验教改项目(20121701)
| 作者 | 单位 | |
| 朱瑞 | zhurui@shiep.edu.cn | |
| 孟光 | ||
| 李鸿光 | ||
| 朱彦 |
| Author Name | Affiliation | |
| ZHU Rui | zhurui@shiep.edu.cn | |
| MENG Guang | ||
| LI Hong-guang | ||
| ZHU Yan |
引用文本：
朱瑞,孟光,李鸿光,等.基于CATIA的轴承三维参数化标准件库的开发[J].上海电力大学学报,2013,29(2):155-157.
ZHU Rui,MENG Guang,LI Hong-guang,et al.Development of Bearing Three-Dimensional Standard Part Library Based on CATIA[J].Journal of Shanghai University of Electric Power,2013,29(2):155-157.
朱瑞,孟光,李鸿光,等.基于CATIA的轴承三维参数化标准件库的开发[J].上海电力大学学报,2013,29(2):155-157.
ZHU Rui,MENG Guang,LI Hong-guang,et al.Development of Bearing Three-Dimensional Standard Part Library Based on CATIA[J].Journal of Shanghai University of Electric Power,2013,29(2):155-157.