本文已被：浏览 959次 下载 575次
投稿时间：2014-09-10
投稿时间：2014-09-10
中文摘要: 根据电厂汽轮机运行规程,针对某320 MW亚临界凝汽式汽轮机,利用有限元软件ANSYS对汽轮机转子建立有限元模型.根据该机组的冷态启动数据,计算出启动过程的最大应力曲线,验证启动过程中最大应力的产生位置.改变蒸汽温升率和暖机时间,拟定不同的冷态启动方案,分析不同启动工况的应力大小和启动时间,建立了时间相关项和启动过程中应力的相关模型,并将启动规划问题转换为限定条件的函数最优化问题.在保证汽轮机转子应力满足强度要求的同时,求出最小的启动时间,优化启动曲线.
Abstract:In accordance with the operating procedures, the Finite Element Method(FEM)model of the rotor is made by taking a 320 MW steam turbine rotor as the research object. The geometry of the rotor is simplified, and the start-up maximum stress curve is calculated based on the cold start data schedule by utilizing ANSYS. The location of the rotor that the maximum stress occurs during the start-up process is verified. Different cold start-up schedules are designed by changing the steam temperature rise rate and warm-up period, and the maximum stresses and the start times with different start-up schedules are compared. The stress model depending on time during the starting-up process is built. Then the start-up plan is converted into an optimization problem with the restrictive conditions. Ensuring the stress of the rotor meeting with the strength, the start-up curve is optimized with the minimum start-up time.
文章编号：20150317 中图分类号： 文献标志码：
基金项目:
引用文本：
兑悦,纪冬梅,黄昌胜.基于非线性函数寻优的汽轮机启动规划[J].上海电力大学学报,2015,31(3):273-277.
DUI Yue,JI Dongmei,HUANG Changsheng.Start-up Optimization for Turbine Rotor Based on Nonlinear Function[J].Journal of Shanghai University of Electric Power,2015,31(3):273-277.
兑悦,纪冬梅,黄昌胜.基于非线性函数寻优的汽轮机启动规划[J].上海电力大学学报,2015,31(3):273-277.
DUI Yue,JI Dongmei,HUANG Changsheng.Start-up Optimization for Turbine Rotor Based on Nonlinear Function[J].Journal of Shanghai University of Electric Power,2015,31(3):273-277.