本文已被：浏览 1344次 下载 553次
投稿时间：2018-03-13
投稿时间：2018-03-13
中文摘要: 针对传统气相色谱仪检测变压器油中溶解气体灵敏度较低的问题，提出了一种对热导检测器恒平均温度供电的方法。采用模拟和数字双闭环控制的方法，设计了对热导检测器进行高精度恒平均温度供电的控制系统，实现了对色谱分析仪热导检测器恒平均温度控制的功能。试验结果表明，模拟与数字双闭环反馈控制动态响应快，受风速扰动影响小，温度控制精度达到±0.1℃，可以满足热导检测器高精度检测的要求。
Abstract:To solve the problem of low sensitivity in detecting dissolved gas in transformer oil by gas chromatography,the method of power supply with constant average temperature is proposed for thermal conductivity detector.The control system of constant average temperature with high precision is designed by the methods of the analog and digital double closed loop for the thermal conductivity detector.The function of constant average temperature control is realized for the thermal conductivity detector in chromatographic analyzer system.The experimental results show that the dynamic response of Analog and digital double closed loop feedback control is fast,the temperature control precision is within ±0.1℃,with small wind speed disturbance,which can meet the requirements of high precision detection for the thermal conductivity detector.
keywords: thermal conductivity detector microcontroller constant temperature control double closed loop system sensitivity
文章编号：20184001 中图分类号： 文献标志码：
基金项目:
| 作者 | 单位 |
| 朱武 | 上海电力学院 电子与信息工程学院, 上海 200090 |
| Author Name | Affiliation |
| ZHU Wu | School of Electronic and Information Engineering, Shanghai University of Electric Power, Shanghai 200090, China |
引用文本：
朱武.热导检测器恒温控制系统的硬件设计[J].上海电力大学学报,2018,34(4):309-314.
ZHU Wu.Hardware Design of Constant Temperature Control System for Thermal Conductivity Detector[J].Journal of Shanghai University of Electric Power,2018,34(4):309-314.
朱武.热导检测器恒温控制系统的硬件设计[J].上海电力大学学报,2018,34(4):309-314.
ZHU Wu.Hardware Design of Constant Temperature Control System for Thermal Conductivity Detector[J].Journal of Shanghai University of Electric Power,2018,34(4):309-314.