本文已被:浏览 851次 下载 432次
投稿时间:1999-09-27
投稿时间:1999-09-27
中文摘要: 根据研究课题的需要, 设计与研制了热态飞灰磨损试验装置, 选用了适当的测量与控制仪表, 并且对该装置进行了调试试验.结果表明该装置动态性能良好, 能够较快而稳定地达到试验工况.
Abstract:A test installation for hot-state flying-ash erosion is designed and developed.The measuring and control instrument suitable to the test installation is equipped.The adjustment test for the installation has been done.The result reveals that the installation has good dynamic performance and can reach the work condition stably and speedily.
文章编号:19990401 中图分类号: 文献标志码:
基金项目:中华电力教育资金资助项目
引用文本:
赵宪萍,孙坚荣,石奇光,等.热态飞灰磨损试验台的研制(Ⅰ)──试验系统的拟定与调试[J].上海电力大学学报,1999,15(4):1-7.
Zhao Xianping,Sun Jianrong,Yang Ping,et al.Development of Test Installation for Hot-state Flying-ash Erosion[J].Journal of Shanghai University of Electric Power,1999,15(4):1-7.
赵宪萍,孙坚荣,石奇光,等.热态飞灰磨损试验台的研制(Ⅰ)──试验系统的拟定与调试[J].上海电力大学学报,1999,15(4):1-7.
Zhao Xianping,Sun Jianrong,Yang Ping,et al.Development of Test Installation for Hot-state Flying-ash Erosion[J].Journal of Shanghai University of Electric Power,1999,15(4):1-7.