本文已被：浏览 945次 下载 494次
投稿时间：2003-12-24
投稿时间：2003-12-24
中文摘要: 比较了Matlab中利用模糊控制工具箱进行模糊控制器设计的两种方法,对其适用性作了讨论.以一类大延迟、大惯性系统为研究仿真案例,提出采用模糊控制加Smith预估器方法的控制方案,并表明该方法具有较好的控制效果.
Abstract:Two kinds of methods using Matlab fuzzy logic toolbox to design Fuzzy controller are compared in this paper, and their application conditions are also discussed. Taking the system that has large delay time for an example, the paper introduces simulation steps. Fuzzy control plus Smith-estimator control method is used to solve large delay system. The experiment result shows that the method is valid.
keywords: Matlab fuzzy control simulation Smith-estimator
文章编号：20040201 中图分类号： 文献标志码：
基金项目:上海市教委青年基金资助(99Q50)
| 作者 | 单位 |
| 王志萍 | 上海电力学院 信息与控制技术系, 上海 200090 |
| Author Name | Affiliation |
| WANG Zhi-ping | Dept. of Information Control and Technology, Shanghai University of Electric Power, Shanghai 200090, China |
引用文本：
王志萍.带有Smith预估器的模糊控制系统仿真研究[J].上海电力大学学报,2004,20(2):1-5.
WANG Zhi-ping.Fuzzy Control System Simulation Study with Smith-estimator[J].Journal of Shanghai University of Electric Power,2004,20(2):1-5.
王志萍.带有Smith预估器的模糊控制系统仿真研究[J].上海电力大学学报,2004,20(2):1-5.
WANG Zhi-ping.Fuzzy Control System Simulation Study with Smith-estimator[J].Journal of Shanghai University of Electric Power,2004,20(2):1-5.